Managed APs |
- Up to 2,000 per controller
- Up to 6,000 per cluster
|
Managed Switches |
- Up to 400 per controller
- Up to 1200 per cluster
|
WLANs (BSSIDs) |
|
VLANS |
|
Concurrent Devices |
- Up to 40,000 per controller
- Up to 120,000 per cluster
|
Device Management |
- RUCKUS Wi-Fi APs supported: R850, R750, R730, R720, R710, R650, R610, R550, R510, R320, R310, M510, H510, C110, H320, E510, T811CM, T750, T750SE, T710, T710S, T610, T610S, T504, T310, T301, FZM300, FZP300
- RUCKUS ICX 700 series switches running FastIron 8.0.80 and above supported; FastIron 80.0.90a required for Zero-Touch Provisioning
|
Device Type Support |
|
Controller Expansion |
- Up to 4 controllers in N+1 active-active mode, supporting non-disruptive capacity expansion
|
Controller Redundancy |
- 3+1 distributed data preserving with N+1 redundancy within a cluster
|
Data Offload |
- Local offload of traffic directly to the Internet
|
AP |
- WPA, WPA2-AES, 802.11i, 802.1x/EAP, PSK, WISPr, WEP, WPA3, Enhanced Open, MAC Address*
- Fast EAP-SIM re-authentication
- EAP-SIM, EAP-AKA, EAP-AKA over WLAN for 802.1x
- Wi-Fi Locations with the SZ AAA-Proxy functionality enabled
|
User Database |
- Internal database up to 25,000 users
- External: RADIUS, LDAP, Active Directory
|
Access Control |
- L2 (MAC address-based) L3/4 (IP and Protocol based)
- L2 client isolation
- Management interface access control
- Time-based WLANs
- Device type access policies
- Two-factor authentication password, SMS
|
Wireless Intrusion Detection (WIDS/WIPS) |
- Rogue AP detection / prevention
- Evil-twin/AP spoofing detection
|
AAA |
- RADIUS (primary and backup)
|
Hotspot |
- WISPr, Wi-Fi CERTIFIED, Passpoint™, HotSpot 2.0*
|
Guest Access |
|
Captive Portal |
|
Mesh |
- Self-healing, Self-forming, Zero-touch provisioning
|
Media |
- 802.11e/WMM, U-APSD, Wi-Fi Calling Prioritization*
|
mDNS Bonjour Fencing |
|
WISPr |
- WISPr authentication, SZ downlink AP Survivability*
|
Software Queues |
- Per traffic type (4), per client
|
SmartCast Traffic Classification |
- Automatic, heuristics and TOS based or VLAN-defined
|
Rate Limiting |
|
WLAN Prioritization |
|
Client Load Balancing |
|
Band Load Balancing |
|
AP Provisioning |
- L3 or L2 auto-discovery
- Auto-software upgrade
- Automatic channel optimization
|
Configuration Management |
- Secure multi-operator login (RBAC)
- Large scale (bulk) AP management tools
- Switch software and firmware upgrades
- Switch configuration management
- Per zone firmware versioning control
- Configuration audit trails
- Alarm and event notification (SNMP V1/V2/V3)
- Event Logging (Syslog)
- Integrated on-board remote accessible EMS
functionality
- RESTful APIs (JSON)
- Web-UI
- CLI
|
Power |
- (FRU Option) AC hot-swappable power supply
- AC power consumption: 135W
- Power Rating: 100-127VAC/200-240VAC, 47-63HZ
|
Dimensions |
- 1RU rack mountable: 435 mm (W) x 522 mm (D) x 44 mm (H); 17.13 in (W) x 20.55 in (D) x
1.73 in (H)
|
Weight |
|
Connections |
- 4 - 1GbE ports
- 4 - 10GbE ports
|
LED |
- Front panel LEDs, one rear LED
|
Fans |
- Three (Field-Swappable fans FRU 902-S120-0000)
|
Mean-Time-Between-Failure (MTBF) |
- At 25C: 167,007 hours
- With 2x fans and 1x AC power supply unit
|
Environmental Conditions |
- Operating Temperature: 0°C (32°F) - 40°C (104°F)
- Operating Humidity: 5% to 95%, noncondensing
- Humidity storage: 95%, non-condensing
|
USA/Canada - FCC + IC, NRTL |
- FCC Part 15B Class A, ICES-003 Class A, UL/CSA 62368-1
|
USA/Canada - NRTL |
|